Name : Automatic machine
Automatic drawing-in machine - weaving enterprise technical renovation of the optional scheme:
Manual drawing-in already cannot satisfy the modern textile enterprises small batch and many varieties, the development trend of difficult, short delivery, weaving industry automatic drawing-in machine must be introduced in order to make sure in the quality and delivery date, suitable for current production needs of textile market change multiterminal maintain its leading position in market competition.
With a domestic textile enterprises 80 s and 100 s efficiency of high density cotton varieties, for example:
Manual drawing-in: wear a pair of 340 type 100 s (28000) to the total number of the root pulp axis 2 people wear at the same time need to 32 hours
Automatic drawing-in: wear a pair of 340 type 100 s (28000) to the total number of the root pulp shaft just four hours
Yongxusheng drawing-in machine features:
Yongxusheng drawing-in machine has electronic double tested device, can be found in both ground and detect the double yarn under the condition of automatic stop, can effectively improve the quality of fabric. Reduce double warp warp yarn is reduced wrong reed situation, improve the benefit of the loom.
YXS - A type of automatic in the machine's performance:
YXS - type automatic drawing-in machine wear yarn speed can reach 140 / min. All YXS - A drawing-in machine for the module's design. Each machine can design according to their respective customer need, also can further increase configuration. On the basis of the standard model, the user can choose the required configuration. According to the actual production of the company need, heald frame type O can be up to 16 pages, J, C 20 pages.
YXS - A process with A heald device can only will warp through the dropper, heddle and reed. Almost can give all the heddle draft, the distinctive features of heald and drop wire is don't need any helper methods (such as: to stop the blade movement, buckles, etc.) to separate them. Whether standard double reed reed or reed can be applicable for air-jet loom, and the yarn count range is extensive.
| Standard | Maximum beam width | 230cm/400cm |
| The yarn car with lifting device | √ | |
| A warp yarn layer of lease | √ | |
| Two heald library guide heddle module | √ | |
| The most number of heald frame (J/C type heddle) | 20 | |
| Most comprehensive article number (O type heddle) | 16 | |
| Reed module | √ | |
| Drop needle module menopause pole number | 6/8 | |
| Double yarn detection | √ | |
| Through the ability to | The biggest drawing-in speed | 140root/min |
| The warp raw material | Cotton yarn and blended yarn, carded and combed yarn) | √ |
| Wool (carded and combed yarn) | √ | |
| Silk, single fiber yarn and filaments | √ | |
| Until the flat wire 4.5 mm wide, slub yarn and boucle | √ | |
| Special yarn | √ | |
| Count | 20-100 | |
| Beam | The maximum nominal width | 230cm |
| The maximum wheel diameter beam | 120cm | |
| A warp yarn layer with lease | √ | |
| Heddle | The length of the wire heald | 260-382mm |
| The thickness of the heddle | 0.25-0.38mm | |
| So ear type | J/C/O | |
| Camb | Minimum 1.28*5.5mm | |
| Reed | The most wide reed space | 230cm/40mm |
| Reed close (standard) | 20-350 reed/metrics | |
| Reed close (reed) | Reed/dm. 351-500 | |
| Dent height | 40-100mm | |
| Reed height | 80-150mm | |
| Dent depth | Diameter16mm | |
| Reed type | The flat, or the curvy reed reed | |
| Drop needle | Drop needle width | 7-11mm |
| Drop needle length | 125-180mm | |
| The thickness of the dropper | 0.2-0.65mm | |
| A dropper is stored | √ | |
| The control module | System | Windws operating system |
| Display | Touch the intelligent monitor | |
| Language | Chinese | |
| Electric power consumption | 3KW | |
| Electric protection | Overload, short circuit protection | |
| Voltage | 380W | |
| Air supply | The input air pressure | 7-10bar |
| The pressure difference | ＜±0.5bar | |
| The minimum air supply | The Lord too 850 nl/min; Suction tube 500 nl/min. The total air supply 1350 nl/min | |
| Pressure dew point | ﹣17℃ | |
| The oil content | Basic not oily | |
| The impurity particles | Particle size ＜5um | |
| Indoor conditions | Dust | Without abrasive dust and similar materials such as glass |
| humidity | 30-95% relative humidity, no condensation | |
| Temperature | 15 ℃ temperature difference is not more than 10 hours | |
| Space requirements | The ground material | Pouring concrete (tight) on the ground |
| Flatness | Maximum not parallel degree plus or minus 15 or 30 mm total difference | |
| Height | 260mm | |
| Layout space: equipped with a yarn machine, equipped with two yarn machine | 70㎡、100㎡ |
